Transfer Removal And Installation (Awd) - Mitsubishi 1989-1993 GALANT Service Manual

AND INSTALLATION
<Non-Turbo>
Removal steps
1. Front exhaust pipe (Refer to GROUP
2. Transfer assembly
2. REMOVAL OF TRANSFER ASSEMBLY
After moving the transfer assembly to the left and lowenng
the front side, then remove it from the propeller shaft.
Caution
1. Be cautious to avoid damaging the transfer oil seal
lip.
2. The propelle shaft should be suspended so that it is
not sharply bent.
3. Cover the transfer opening with the special tool to
prevent transaxle oil discharge and the entry of
foreign objects.
TSB Revision
2