-Clutch tube
Secure side
6. DISCONNECTION OF HOSE CLIPSI7. CLUTCH
To disconnect clutch hose from the clutch tube, proceed.
as follows:
(1) Secure the nut on the clutch hose and loosen the flare
nut on the clutch tube.
(2) Remove the clip from the clutch hose to remove clutch
hose from bracket.
l
Check the clutch hose or tube for cracks or clogging.
7. INSTALLATION OF CLUTCH
CLUTCH TUBE
Temporarily tighten the flare nut by hand, and then tighten
it to the specified torque, being careful that the clutch
hose does not become twisted.