Mitsubishi 1989-1993 GALANT Service Manual page 140

E N G I N E < D O H C > - Timing Belt
(5) Install the timing belt around the intake side camshaft
sprocket and fix it at indicated position by a spring type
paper clip (binder clip).
(6) Install the timing belt around the exhaust side sprocket,
aligning the timing marks with the cylinder head top
surface using two wrenches.
(7) Fix the belt at indicated position by another binder clip.
(8) Install the timing belt around the idler pulley, the oil
pump sprocket, the crankshaft sprocket and the ten-
sioner pulley in the order shown.
(9) Remove the two binder clips.
tighten the center bolt.
Then, turn it clockwise until the timing marks are lined
up again.