Manual Transaxle (Fwd) Service Adjustment Procedures; Transaxle Oil Replacement; Drive Shaft Oil Seals Replacement - Mitsubishi 1989-1993 GALANT Service Manual

R.H. side x
Front exhaust pipe
Refer to GROUP 00-Maintenance Service.
(1) Position vehicle on a flat level.
(2) Remove filler and drain plugs and allow the transaxle oil to
drain.
(3) Refill the transaxle to the proper level with specified
transaxle oil. The oil level should be the bottom of the oil
filler hole.
Transaxle oil: Hypoid gear oil SAE 75W-85W conform-
ing to API classification GL-4 or higher
(1) Disconnect the drive shaft from the transaxle.
(Refer to GROUP 26-Drive Shaft.)
(2) Using a flat-tip (-) screwdriver, remove the oil seal.
(3) Using the special tool, tap the drive shaft oil seal into the
transaxle.
(4) Apply a coating of the transaxle oil to the lip of the oil seal.
Transaxle oil: Hypoid gear oil, SAE 75W-85W con-
forming to API GL-4 or higher
1.8 dm3 (1 .S qts.)
2.3