Mitsubishi 1989-1993 GALANT Service Manual page 869

REAR AXLE <FWD>
TSB Revision
2. REMOVAL OF CALIPER ASSEMBLY
Remove the caliper assembly and suspend it with a piece
of wire.
8. REMOVAL OF REAR ROTOR
Caution
Care must be taken not to scratch or otherwise damage
the teeth of the rotor. The rotor must never be dropped.
If the teeth of the rotor are chipped, resulting in a
deformation of the rotor, it will not be able to accurate-
ly detect the wheel rotation speed, and the system will
not function normally.
INSPECTION
Check the oil seal for crack or damage.
l
Check the surface of bearings for seizure, discoloration or
l
roughened raceway.
Check the rear hub for wear or damage.
l
SERVICE POINTS OF INSTALLATION
5. INSTALLATION OF NUT
After tightening the nut, crimp the slit part.
27-9