Transaxle (Fwd) Removal And Installation - Mitsubishi 1989-1993 GALANT Service Manual

11-16 ft.lbs.
Removal steps
l *
2. Cotter pin
3. Connection for select cable
4. Connection for shift cable
5. Connection for clutch release cylinder
6. backup light switch connector
7. Connection for speedometer cable
l + 8. Connection for starter
9. Transaxle assembly upper part coupling
27-34 Nm
11-16 ftlbs.
Pre-removal Operation
l Removal of the Air Cleaner Assembly
(Refer to GROUP 15-Air Cleaner.)
Post-installation
l Installation of the Air Cleaner Assembly
(Refer to GROUP 15-Air Cleaner.)
l Installation of the Battery and Battery Tray
*Checking the Operation of the Shift Lever
l Checking the Ooeration of the Meters and Gauaes
NOTE
t-or tightening locations indicated by the * symbol, first
tighten temporarily, and then make the final tightening with
the entire weight of the engine applied to the vehicle body.
TSB Revision
43-58 ft.lbs.*
Operation