Transaxle Assembly (Fwd) Removal And Installation - Mitsubishi 1989-1993 GALANT Service Manual

AUTOMATIC TRANSAXLE - Transaxle Assembly <FWD>
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Op-
eration
@Draining and Supplying of the Transaxle
Fluid
(Refer to GROUP 00-Maintenance Ser-
vice.)
*Removal and Installation of the Battery
and Battery Tray
*Removal and Installation of the Air Com-
pressor
(Refer to GROUP 33B-Air Compressor.)
43-55 Nm
22-25 ft.lbs.
1. Snap pin
3. Connection for transaxle control cable
(Refer to P.23-84.)
4. Solenoid connector
5. Park/neutral position switch connector
6. Pulse generator connector
7. Kickdown servo switch connector
8. Oil temperature sensor connector
27-34 Nm
I 3
TSB Revision
43-58 ft.lbS. 43-58 ft.lbs.
27-34 Nm
22-25 ft.lbs.
9. Connection for sppedometer cable
11. Connection for starter motor
12. Upper coupling bolt for transaxle
assembly and engine assembly
13. Transaxle mount bracket