Conference - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
Conference lets an extension user add additional inside and outside callers to their conversation. With
Conference, a user can set up a multiple-party telephone meeting without leaving the office. The
CD-CP00-US provides 64 conference ports, to allow any number of internal or external parties to be
conferenced together for a limit of 32 parties. This means that one extension can conference up to 31
internal and/or external parties together (the originator would be the 32nd party reaching the maximum
of 32). While this Conference call is active, another user can initiate a separate Conference also for a
limit of 32 parties, or any number of conferences can be initiated with any number of parties (up to 32)
until all 64 Conference ports are busy.

64 conference ports are available with a PZ-ME50-US mounted on the CD-CP00-US and a second cabinet installed.
Without the second cabinet and PZ-ME50-US installed, the CD-CP00-US provides a maximum of 32 conference ports.
Conditions
An ADA module is required for speech recording.

Split allows a user to alternate (i.e., switch) between their callers in Conference. This allows

a dispatcher, for example, to control a telephone meeting between themselves, a customer
and a service technician. The dispatcher can meet together with all parties, privately set up
a service strategy with the technician and then meet again to set the schedule.
Split cycles through the Conference in the same order in which the Conference was initially

set up. If a user places an outside call, conferences extension 101 followed by extension
102, Split cycles from the trunk, to 101 and finally to 102. The Split cycle then repeats.
If a user's extension has Barge-In enabled, they can also Barge-In on an established

Conference. This permits, for example, an attendant or supervisor to join a Conference in
an emergency. It also allows a co-worker to leave a conference – and then rejoin the
telephone meeting when it is convenient to do so.

If a user's extension has Barge-In monitor enabled (Program 20-13-10), they can Silent Monitor a
conference already in progress (Program 99-01-49 option 49 must be set to 1).
A Class of Service option is available which allows or denies an extension user from

automatically setting up a Conference/Tandem Trunking call upon hanging up the
telephone.
An extension with Barge-In enabled can Transfer a call to an existing Conference. This

allows, for example, an attendant to locate co-workers and then Transfer them to an
existing telephone meeting. There is no need for the attendant to locate all the parties at the
same time and sequentially add them into the Conference. Transfer Call Into Conference
Code (624).

Conference

Issue 12.0
Conference
2 - 339