NEC Univerge SV8100 Features And Specifications Manual page 389

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.

The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-03-01 ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
10-03-02 ETU Setup (DLCA PKG Setup) –
Logical Port Number (B1)
Cordless DECT Terminals
Description/Comments
Setup and confirm the Basic
Configuration data for terminal
type (B1).
Use to setup and confirm the
Basic Configuration data for
logical port number (B1).
Assigned Data
1
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
0 = Not set
1 = Multiline Terminal
(1~256)
2 = SLT Adapter
(1~256)
6 = PGD(2)-U10 ADP
(Paging) (1~8)
7 = PGD(2)-U10 ADP
(for Tone Ringer) (1~8)
8 = PGD(2)-U10 ADP
(for Door Box) (1~8)
9 = PGD(2)-U10 ADP
(for ACI) (1~96)
10 = DSS (1~32)
11 = -- Not Used --
(default = 0)
Issue 12.0
Level
2 3


2 - 359