NEC Univerge SV8100 Features And Specifications Manual page 371

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Required Component(s)
None
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-12-08
Service Code Setup (for Service
Access) – Barge-In
11-12-47
Service Code Setup (for Service
Access) – Call Waiting Answer/
Split Answer
11-12-57
Service Code Setup (for Service
Access) – Tandem Trunking
11-12-58
Service Code Setup (for Service
Access) – Transfer Into
Conference
11-16-02
Single Digit Service Code Setup
– Barge-In
14-01-04
Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
Conference
Description/Comments
Determine what the service code
should be for an internal party to
use the Barge-In feature.
If required, change the code users
dial to Split while on a call.
With two trunks in Conference
press Hold and dial
8 and the
#
Conference/Tandem happens.
If required, change the service
code used to transfer a call into a
Conference call.
Customize the one-digit Service
Codes used for Barge-In.
Select the CODEC gain type used
by the trunk when it is part of an
unsupervised conference.
Assigned Data
1
MLT, SLT
(default = 710)
SLT
(default = 794)
MLT, SLT
(default =
8)
#
MLT, SLT
(default = 624)
(default not assigned)
1~63(-15.5dB~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
Issue 12.0
Level
2
3
2 - 341

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents