NEC Univerge SV8100 Features And Specifications Manual page 430

Issue 7.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-19 Service Code Setup (for Setup/
Entry Operation) – Key Touch
Tone On/Off
Operation
To enable/disable Dial Pad Confirmation Tone:
1. Pick up the handset or press Speaker.
2. Dial 724.
2 - 402
Description/Comments
If required, change the service
code to enable or disable the Key
Touch Tone.
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 724)
Dial Pad Confirmation Tone
Level
2 3
