NEC Univerge SV8100 Features And Specifications Manual page 365

UNIVERGE SV8100
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
21-04-01 Toll Restriction Class for
Extensions
21-05-04 Toll Restriction Class –
Maximum Number of Digits
Table Assignment
21-06-03 Toll Restriction Table Data Setup
– Maximum Number of Digits
Table Assignment
Operation
To use Continued Dialing:
1. Place an intercom or trunk call.
2. Continue dialing after the call connects.
Toll Restriction and Class of Service programming may limit Continued Dialing.

Continued Dialing
Description/Comments
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension user
ability to use Continued Dialing,
which allows DTMF signal sending
while talking on extension.
Assign a Toll Restriction Class
(1~15) to an extension.
Select the table (defined in
Program 21-06-03) to be used to
determine the maximum number
of digits allowed for outgoing calls.
Set the Maximum Number of digits
dialed for each table.
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On

(default = 1 for
COS 1~15)
Day/Night Mode
1~9 (9 = Power Failure

Mode)
1~15
(default = 2)
1~4 = Table
0 =Disable (None)
Default:

1, 2, 6~15 = 0
3 = 1
4 = 2
5 = 3
4-30

default:
Tables 1~4 = 30
Issue 7.0
Level
2 3
2 - 337