NEC Univerge SV8100 Features And Specifications Manual page 364

Issue 7.0
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Pulse to Tone Conversion
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
2 - 336
Description/Comments
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
UNIVERGE SV8100
Assigned Data
1
0 = Normal
1 = Special
(default = 0)

Continued Dialing
Level
2 3