NEC Univerge SV8100 Features And Specifications Manual page 455

UNIVERGE SV8100
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
22-09-01 DID Basic Data Setup – Expected
Number of Digits
22-09-02 DID Basic Data Setup – Received
Vacant Number Operation
22-10-01 DID Translation Table Setup
Direct Inward Dialing (DID)
Description/Comments
For each Night Service Mode,
enter service type 3 when the
trunk should be a DID trunk.
Assign extensions to Ring Groups.
Calls ring the extensions
according to programming in
Program 22-06.
For each DID Translation Table
(1~20), enter the number of digits
the table expects to receive from
the CO (eight maximum). For
example, for a table used with
3-digit DID service, enter 3.
Enable/Disable Vacant Number
Intercept.
Assign the start and end range of
DID Translation Table entries
(1~2000) to each DID Translation
Table (1~20).
Assigned Data
1
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID

4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
1~8
(default = 4)

0 = Disconnect
1 = Transfer
(default = 0)
0~2000
(0 = No Setting)
default:
1st:
1 Start – 1, End – 100
2 Start – 101, End –
200
3 Start – 201, End –
300
4 Start – 301, End –
400
5~20 Start – 0, End – 0
2nd:
1~20 Start – 0, End – 0
Issue 7.0
Level
2 3



2 - 427