11 Power Saving Functionality
3.
Conditions for transition to Off
Timer control is used for transition to Off. LEDs transition to Off 60 seconds after the
last transition to normal brightness. [AX2200S]
Timer control is used for transition to Off. LEDs transition to Off 10 seconds after the
last transition to power saving brightness. [AX1250S] [AX1240S]
LEDs do not transition from normal brightness to Off.
The following table lists and describes the behavior of LEDs subject to the control of
automatic operation. The PWR LED is not subject to the control. The PWR LED always
illuminates with normal brightness.
130