Resuming And Stopping Power Supply, And The Port Status - Alaxala AX2200S Series Configuration Manual

13 Ethernet

13.10.5 Resuming and stopping power supply, and the port status

(1) Resuming and stopping power supply by using an operation command
You can use the
the Switch ports for which power supply has been stopped.
However, the configuration of ports, execution of operation commands, and behavior of
power saving schedule affect power control.
The following table describes configuration commands and scheduled power saving
operation, and the effect on power supply control.
Table 13-29 Configuration commands and scheduled power saving operation, and the
Specifi Configuration commands
ed for
Switch Not supported
Port shutdown
no shutdown
power inline never
schedule-power-control
shutdown interface
no schedule-power-control
shutdown interface
Legend:
Y: Affected (Power supply to the relevant ports is resumed or stopped.)
N: Not affected.
--: Not affected because the command is not supported.
The following table describes operation commands and the effect on power supply control.
Whether the scheduled power supply operation is enabled is not affected.
204
activate power inline
effect on power supply control
operation command to resume power supply to
Effect on power supply control
Scheduled power saving operation
Disabled Enabled
(Normal
time range)
-- --
Y Y
Y Y
Y Y
N N
N N
Remarks
Enabled
(Scheduled
time range)
--
N
N
Y Forcible
stop of
power
supply
Y
Y