Alaxala AX2200S Series Configuration Manual page 230

13 Ethernet
Switch is restarted when its total power consumption requirement exceeds 370.0 W, the
ports for which power is supplied might be different from the ones before restarting the
Switch.
(3) Connecting a device using Pre.STD
AX2200S series switches do not support connection to a device using Pre.STD.
For AX1240S series switches, use a straight cable to connect a PD that supports Pre.STD.
A connection cannot be established by using a crossover cable.
(4) When a power saving scheduled is also used
If schedule-power-control shutdown interface
appear not to respond for ten seconds or so at the timing of switching to the scheduled time
range.
(5) Notes when the port status transition to denied [AX2200S]
If the port status transitions to
To restore power, execute the
208
is set to a PoE port, the console might
denied , the Switch stops power supply to the relevant port.
activate power inline operation command.