Table of Contents
Advertisement
11 Power Saving Functionality
(2) Start mode for the scheduling functionality
You can use the
following two modes as the start mode for the scheduling functionality:
Schedule-enabled mode
In this mode, both settings for a normal time range and a scheduled time range are
applied. The setting for a scheduled time range is applied when the operating time is
in the scheduled time range. The setting for a normal time range is applied when the
operating time is outside the scheduled time range.
When the Switch starts due to expiration of the scheduled time, the Switch operates
in schedule-enabled mode.
Schedule-disabled mode
In this mode, only the setting for a normal time range is applied. The setting for a
normal time range is applied even when the operating time is within the scheduled
time range.
When sleep mode is forcibly cancelled after you held down the RESET button on the
Switch, the Switch operates in schedule-disabled mode.
However, schedule-disabled mode automatically changes to schedule-enabled mode
when the operating time enters the normal time range.
(3) Scheduling power control
Set the period when the switch is to operate in power control mode. Specify the start time
and end time in any of the following ways:
Enabling power control by date and time
Enabling power control by day of the week and time
Enabling power control by daily time range
Disabling power control by specific date and time
You can use these methods in combination to enable or disable power control at various
times.
You can use the
maximum of 50 schedule time ranges.
136
set power-control schedule
schedule-power-control time-range
operation command to select either of the
configuration command to set a
Advertisement
Table of Contents
