Optional Functionality Of Mac Ports - Alaxala AX2200S Series Configuration Manual

Table of Contents

Advertisement

(2) Automatic VLAN assignment for a MAC port
To set a VLAN for a MAC port, use the
configure the setting, or use automatic assignment by using the Layer 2 authentication
functionality.
Automatic VLAN assignment operates with the following Layer 2 authentication methods:
IEEE 802.1X:Port-based authentication (dynamic)
Web authentication: dynamic VLAN mode
MAC-based authentication: dynamic VLAN mode
If you used the
automatically assigned to a port, cancel the automatically assigned VLAN. Authenticated
terminals, however, follow the configuration that has been set, so authentication is not
cancelled.
For details about automatic VLAN assignment of Layer2 authentication, see 5.4
Functionality common to all Layer 2 authentication methods in the Configuration Guide Vol.
2.

17.7.4 Optional functionality of MAC ports

Optionally, a MAC port can forward tagged frames with an arbitrary VLAN ID.
Use the
switchport mac dot1q vlan
specify a port VLAN or MAC VLAN as a VLAN set by the
configuration command.
You do not have to use a configuration command to register the MAC address of a device
that supports tagged frames and is to be accommodated in the VLAN because the device is
accommodated in the VLAN due to the VLAN tags in the frames.
(1) Behavior of received frames
A tagged frame that contains a VLAN ID set by the
configuration command is forwarded to the relevant VLAN. If this command is used, the
tagged frames that contain the VLAN IDs set in Table 17-11 Configuration commands and
VLAN types are forwarded.
(2) Behavior of sent frames
Whether the frames have a VLAN tag differs depending on the forwarding destination of the
tagged frames on the VLAN set by the
command.
Table 17-10 Forwarding destination and handling of tagged frames
Forwarding destination
Access port
Native VLANs for trunk ports
VLANs other than the Native VLANs
for trunk ports
Native VLANs for protocol ports
MAC VLANs for MAC ports
switchport mac vlan
Handling of tagged frames
After the tags are removed, untagged frames are sent.
After the tags are removed, untagged frames are sent.
Tagged frames are sent.
After the tags are removed, untagged frames are sent.
After the tags are removed, untagged frames are sent.
swithcport mac vlan
configuration command to set a VLAN that had been
configuration command to set this function. You can
switchport mac dot1q vlan
switchport mac dot1q vlan
switchport mac dot1q vlan
17 VLANs
configuration command to
configuration
273

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax1250s seriesAx1240s series

Table of Contents