Table of Contents
Advertisement
Device information type
Secure Wake-on-LAN terminal information database
[OP-WOL]
Secure Wake-on-LAN user authentication database
[OP-WOL]
Legend:
Y: Compatible.
N: Not compatible.
R: With some restrictions
--: Not supported and not be included in the backup file.
→: Restore destination of the created file
#1
Commands that are not supported in AX1230S series switches cannot be read.
#2
Cannot be restored by the
#3
Depending on the software version of the AX1230S series switch, it might be
necessary to add tags specific to Web authentication to the Web authentication
replacement window file.
Table 10-13 Adding tags specific to Web authentication to the Web authentication
replacement window file
Version of AX1230S
Version 1.2 to 1.2.x
Version 1.3 to 1.3.x
Version 1.4 or later
When one-time password authentication is used, the Web authentication
replacement window file and tags specific to Web authentication are added. For
more details, see 14 One-time Password Authentication [OP-OTP] in the
Configuration Guide Vol. 2.
#4
Restoration is available if the software version of the AX1230S series switch is
version 1.3 or later.
restore
Tags to be added specific to Web authentication
Write the following: tags specific to Web authentication
Redirect_URL
-->"), which is used to automatically display URL, and the
URL to be displayed after a successful login and the time to move to the URL
(configuration setting in the
configuration command).
Write the time to move to the specified URL under the tags specific to Web
("<!-- Redirect_URL
authentication
automatically display URL. Set the time to the value of the
web-authentication jump-url
in the
Adding of tags is not necessary.
AX1230S→
AX1250S/AX1240S
--
--
operation command.
web-authentication jump-url
-->"), which is used to
configuration command.
10 Device Management
AX1250S/AX1240S
→AX1230S
N
N
("<!--
delay
parameter
119
Advertisement
Table of Contents
