Operation; List Of Operation Commands; Verifying Communication Between A Remote Terminal And The Switch - Alaxala AX2200S Series Configuration Manual

7.3 Operation

7.3.1 List of operation commands

The following table describes operation commands related to terminal connections and
remote operations.
Table 7-2 List of operation commands
Command name
set exec-timeout
set terminal pager
telnet
ftp
line console
speed
trace-monitor

7.3.2 Verifying communication between a remote terminal and the Switch

You can verify that the Switch and remote operation terminal are communicating by using
the ping
Description
Specifies the length of time until the user is automatically logged out.
Enables or disables paging.
Connects via Telnet to a remote host that has a specified IP address.
Transfers files between the Switch and a remote operation terminal connected via
TCP/IP.
Changes the communication speed of the console (RS232C).
Sets whether to display the operation log on the monitor.
operation command. For details, see 26 IPv4 Interfaces.
7 Remote Login
79