(forwarding-delay-time) and the reception hold time for flush control frames
(forwarding-shift-time)
Set a smaller value for the forwarding transition time for the control VLAN
(
forwarding-delay-time
frames for the data transfer VLAN (
than the value for the reception hold time for flush control frames
(
forwarding-shift-time
node detects a fault, and a loop might occur.
20.6.3 Prohibited Ring Protocol configurations
For details about prohibited configurations, see the manuals that describe the master node.
20.6.4 Prohibited configurations for the multi-fault monitoring functionality
For details about prohibited configurations, see the manuals that describe the master node.
) than the value for the reception hold time for flush control
forwarding-shift-time
), forwarding starts on the data transfer VLAN before the master
20 Description of the Ring Protocol
). If you set a larger value
381