Notes On Changing The Time - Alaxala AX2200S Series Configuration Manual

9 Time Settings and NTP
(2) Obtaining the time from a multicast message (Multicast mode)
Figure 9-3 Time acquisition in Multicast mode
(3) Obtaining the time from a broadcast message (Broadcast mode)
Figure 9-4 Time acquisition in Broadcast mode
(4) Manual acquisition

9.1.2 Notes on changing the time

CPU usage in the statistics collected on the Switch is cleared to 0 in the following cases:

The Switch is restarted or in sleep mode due to the scheduling of the power-saving
functionality.

The time zone is changed by the

The
client (only the data displayed in seconds is cleared).
102
In Multicast mode, the Switch receives the multicast time distribution from the
NTP server, and updates the local time based on the obtained time
information.
In Broadcast mode, the Switch receives the broadcast time distribution from
the NTP server, and updates the local time based on the obtained time
information.
Use an operation command to specify an NTP server address. The Switch
requests time information from the NTP server, and then updates the local
time based on the obtained time information. If an NTP server address is not
specified, the NTP server address set in the configuration for regular time
update is used.
set clock operation command is executed, or the time is changed on the NTP
clock timezone configuration command.