Table of Contents
Advertisement
17 VLANs
Figure 17-11 Example MAC VLAN settings
(1) Creating MAC VLANs and registering MAC addresses
Points to note
You can create a MAC VLAN. When a VLAN is created, a VLAN ID and the
mac-based
As shown here, the MAC address belonging to the VLAN is also set. VLANs are
registered for each terminal from A to C in the example configuration. Terminal D is
not registered because communication with the MAC VLAN is not permitted for
terminal D.
Command examples
1.
(config)# vlan 10 mac-based
Creates VLAN 10 as a MAC VLAN. This command switches to VLAN configuration
mode.
2.
(config-vlan)# mac-address 0012.e200.0001
(config-vlan)# mac-address 0012.e200.0002
(config-vlan)# exit
Registers terminal A (0012.e200.0001) and terminal B (0012.e200.0002) for MAC
VLAN 10.
3.
(config)# vlan 20 mac-based
(config-vlan)# mac-address 0012.e200.0003
(config-vlan)# exit
Creates VLAN 20 as a MAC VLAN, and registers terminal C (0012.e200.0003) for
MAC VLAN 20.
276
parameter are specified.
Advertisement
Table of Contents
