Table of Contents
Advertisement
Table 10-3 Operation commands (memory card and RAMDISK check)
Command name
show mc
show mc-file
show ramdisk
show ramdisk-file
format flash
format mc
Table 10-4 Operation commands (logging control)
Command name
show logging
clear logging
show critical-logging
clear critical-logging
Table 10-5 Operation commands (resource information check)
Command name
show cpu
show memory summary
10.1.2 Checking the software version
Using the
installed in the Switch. An example is shown below:
Figure 10-1 Checking software version
> show version
Date 2009/03/17 16:31:29 UTC
Model: AX1240S-24P2C
S/W: OS-LT2 Ver. 2.1 (Build:yy)
H/W: AX-1240-24P2C [ssssssssssssssssssssss:0]
>
Description
Displays the memory card format and card usage.
Displays the names and sizes of the files on the memory card.
Displays the RAMDISK format and usage.
Displays the names and sizes of the files on the RAMDISK.
Initializes the internal flash memory file system.
Initializes formats the memory card for use by the Switch.
Description
Displays only the messages and the times that operation log entries
were acquired.
Erases the operation log entries recorded by the Switch.
Displays the detailed information regarding device failure log data as log
records.
Erases the switch failure log entries recorded by the Switch.
Description
Shows CPU usage.
Display the installed capacity, used capacity, and free capacity of the
physical memory of the device.
operation command, you can view information about the software
show version
10 Device Management
109
Advertisement
Table of Contents
