Item
Single Spanning Tree
target VLAN
19.6.3 Notes on Single Spanning Tree usage
(1) Notes on use with other functionality
For details, see 15.3 Compatibility between Layer 2 switch functionality and other
functionality.
(2) VLAN 1 (default VLAN) PVST+ and Single Spanning Tree
Single Spanning Tree and VLAN 1 PVST+ cannot be run at the same time. When Single
Spanning Tree is run, the VLAN 1 PVST+ is stopped.
VLAN
251st and subsequent port VLANs
VLANs for which PVST+ is stopped (specified by the
vlan
configuration command)
Default VLANs (port VLANs with a VLAN ID of 1)
Protocol VLANs
MAC VLANs
19 Spanning Tree Protocol
no spanning-tree
317