9 Time Settings and NTP
9.2.3 Regularly obtaining time information from the NTP server
Using the NTP client functionality, the Switch regularly obtains time information from the
NTP server.
Points to note
You can set the address of the NTP server from which the Switch requests time
information. Use the
requests.
Command examples
1.
(config)# ntp client server 192.168.1.100
Sets the address of the NTP server from which the Switch requests time information.
2.
(config)# ntp interval 7200
Sets the interval (in seconds) for requesting time information from the NTP server. (If
the
3,600 seconds (1 hour) is used for the Switch to request the time information.)
104
ntp interval
ntp interval
configuration command has not been set, the default interval of
configuration command to set the interval of the