Alaxala AX2200S Series Configuration Manual page 220

13 Ethernet
maximum of 30.0 W on ports 0/5 to 0/24 (system 2).
Overview of the power supply functionality on an AX2200S series
Figure 13-6
Table 13-25 Overview of the PoE functionality on an AX2200S switch
Functionality
Model
Maximum
capacity of
power supply
Pre.STD
Priority control
(1) Power control for entirely Switch
An AX2200S series switch controls the maximum amount of power that can be supplied by
the entire Switch by means of two power supply systems: system 1 (for ports 0/1 to 0/4) and
system 2 (for ports 0/1 to 0/4).
Table 13-26 Power control for each system shows the maximum power control for each
system.
For system 1, you can use the configuration command below to set the maximum amount
of power that can be supplied. To apply this configuration command, you need to restart the
Switch.
power inline system-allocation limit
198
switch
For entire Switch [W]
For each port [W]
For each class [W]
Specifications
AX2230S-24P
System 1: 0/1 to 0/4
System 2: 0/5 to 0/24
Class 0
Class 1
Class 2
Class 3
Class 4
Not supported
Operates within system 1.
Operates within system 2.
<Threshold>
Remarks
370.0
60.0 Manually set by the
configuration.
30.0
15.4
4.0
7.0
15.4
30.0