Alaxala AX2200S Series Configuration Manual page 109

(1) Scope of RADIUS authentication
RADIUS authentication can be used for the following operations:

Telnet access from a remote terminal (IPv4)

FTP access from a remote terminal (IPv4)
RADIUS authentication cannot be used for the following operation:

Login from a console (RS232C)
(2) Scope of support of RADIUS server
The Switch supports the following NAS functionality for communication with a RADIUS
server:
Table 8-3 Scope of RADIUS implementation
Category
Documentation
Packet types
Attribute
(a) Description of supported RADIUS attributes
The table below describes the RADIUS attributes.

Access-Request packet
No attributes other than those listed above are attached to Access-Request packets
sent by the Switch.

A ccess-Accept, Access-Reject, or Access-Challenge packet
Attributes other than those listed above are ignored by the Switch if attached to the
packet.
Description
Supported RADIUS functions described herein are limited to NAS-related
functions only.
Supports the following packet types used for login authentication:

Access-Request (send)

Access-Accept (receive)

Access-Reject (receive)

Access-Challenge (receive)
Supports the following attributes used for login authentication:

User-Name

User-Password

Service-Type

NAS-IP-Address

Reply-Message

State

NAS-Identifier
8 Login Security and RADIUS
87