Table of Contents
Advertisement
5.2.6 Paging
When the information you want to view in the command execution results extends outside
the viewable area, you can scroll the information page by page, by input from the keyboard.
Paging can be enabled or disabled by executing the
command.
5.2.7 Keyboard command functionality
Available keys depend on the terminal application and terminal settings. ALAXALA
Networks Corporation recommends that you use the key combinations listed in the
following table (in which keys whose specification is clearly defined in VT100 are used) for
operation.
Table 5-3 Recommended keyboard commands
Keyboard
Backspace
Ctrl + A
Ctrl+ B
Ctrl + C
Ctrl + D
Ctrl + E
Ctrl + F
Ctrl + L
Ctrl + N
Ctrl + P
Ctrl + U
Ctrl + W
Ctrl + Z
Ctrl + K
Ctrl + T
Action of the Switch
Deletes the character immediately before the cursor. (You can delete characters
until the beginning of the line.)
Moves to the beginning of the command line.
Moves one character backward. (You can move until the beginning of the line.)
Stops execution of the command.
Deletes one character.
Moves to the end of the command line.
Moves one character forward. (You can move until the end of the line.)
Refreshes the console screen, and clears everything in the display other than the
command input line.
Displays the next command in the command history until the current command
appears.
Displays the previous command in the command history.
Deletes the text on the cursor line.
Deletes from the beginning of the word to the cursor position.
Example:
!> show sysversion
~
In the above input state, move the cursor immediately before the character v, and
press Ctrl + W. The characters
follows:
!> show version
Ends configuration command mode and returns you to administrator mode.
Deletes the text after the cursor.
Exchanges the current character and the previous character.
set terminal pager
sys
sysversion
of the word
5 Command Operations
operation
are deleted as
53
Advertisement
Table of Contents
