Designing Networks For Multiple Spanning Tree - Alaxala AX2200S Series Configuration Manual

19 Spanning Tree Protocol
Figure 19-13 Overview of Multiple Spanning Tree

19.9.2 Designing networks for Multiple Spanning Tree

(1) Configuring load balancing for each MST instance
Multiple Spanning Tree allows load balancing to be performed for each MST instance. The
figure below shows an example configuration for load balancing. In this example, VLANs
10 and 20 are set for MST instance 1, VLANs 30 and 40 are set for MST instance 2, for load
balancing in two parts. As shown in this example, Multiple Spanning Tree can enable load
balancing by managing four VLANs with just two trees.
327