Table of Contents
Advertisement
21 Settings and Operation for the Ring Protocol
Figure 21-4 Multi-ring configurations with shared links (extended configuration)
(a) Nodes (transit) within shared links for shared link non-monitoring rings
Points to note
The operating mode for the Switch can be set the operating mode for the Switch to
transit mode in a ring. The S7 node in Figure 21-4 Multi-ring configurations with
shared links (extended configuration) corresponds to this setting. The
parameter is specified for both ring ports, and they are set as the shared port. Ring
port [R3] for the S7 node in Figure 21-4 Multi-ring configurations with shared links
(extended configuration) corresponds to this setting.
Command examples
1.
(config)# axrp 1
(config-axrp)# mode transit
(config-axrp)# exit
Sets the operating mode for ring ID 1 to transit mode.
2.
(config)# interface fastethernet 0/1
(config-if)# axrp-ring-port 1 shared
392
shared
Advertisement
Table of Contents
