Table of Contents
Advertisement
5 Command Operations
Figure 5-11 Example of when more than one parameter (enclosed with [ ]) with no fixed
(dhcp-config)# lease 360 [?]
<Time hour>
<Time min>
<Time sec>
<cr>
(dhcp-config)# lease 360 [Tab]
<cr>
In the above example, after you enter
question mark (
parameters that cannot be input are displayed as shown in the above figure (marked with
bold underline).
(c) When a variable value parameter and a fixed character string keyword are in the same
input order
When a variable value parameter and a fixed character string are in the same input order,
the fixed character string keyword is given priority. Therefore, if the character string of a
variable value parameter perfectly matches the beginning part of a fixed character string
keyword, the character string is recognized as the fixed character string keyword
(command line completion is enabled).
The following is an example of when an entered character string is recognized as a fixed
character string keyword, and an example of when an entered character string is
recognized as a variable value parameter.
Figure 5-12 Example of when a variable value parameter is recognized as a fixed
(config)# aaa authentication mac-authentication
<List name>
default
(config)# aaa authentication mac-authentication de
string keyword
group
local
In the above example,
because the entered character string
character string keyword
entered character string is recognized as
be input after
Figure 5-13 Example of when an entered character string is recognized as a variable value
(config)# aaa authentication mac-authentication device
parameter
group
(config)# aaa authentication mac-authentication device
In the above example,
this case, because the entered character string
beginning part of the fixed character string keyword
order as
<List
for the character string that can be input after
56
character string keyword is entered
- [0-23]
- [0-59]
- [0-59]
<Time hour>
), parameters that can be input are displayed. However, at the same time,
?
character string keyword
- Specify the RADIUS server list name 1 to 32 characters
- Specify default mac authentication mechanism
- Specify mac authentication mechanism using RADIUS pro
tocol
- Specify mac authentication mechanism using local pass
word
is entered as the variable value parameter
de
default
default
is displayed.
parameter
.
- group <Group name>: Specify mac authentication mechan
ism using RADIUS protocol
device
is entered as the variable value parameter
name>, the entered character string is recognized as
<Time min>
lease 360
(when specifying until
⇒ Recognized as a fixed character
de
perfectly matches the beginning part of the fixed
, which is in the same input order as
default
, and the Help for the keywords that can
device
does not perfectly match the
default
<List name>
<Time sec>
days
) and then a
<List
name>. However,
<List
name>, the
⇒ Recognized as a variable value
<List
, which is in the same input
device
, and the Help
is displayed.
name>. In
Advertisement
Table of Contents
