Alaxala AX2200S Series Configuration Manual page 107

Notes




(2) Authenticating remote operation terminals by using RADIUS
RADIUS authentication can be used when a remote operation terminal tries to log in to the
Switch.
An access list for use by the Switch does not depend on the settings of the
flow detection mode.
IP addresses that meet the permit conditions are permitted remote login.
IP addresses that meet the deny conditions are not permitted remote login.
Implicit deny conditions for all IP addresses are set in the final list of the IP
access group. If an IP address does not match any of the registered groups, it
is assumed to meet an implicit deny condition, and the remote login is
rejected.
If no access list is registered in the IP access group, remote login is handled
as if the permit conditions are met.
8 Login Security and RADIUS
85