Table of Contents
Advertisement
10 Device Management
AX1250S/AX1240S command
deny (ip access-list extended)
deny (ip access-list standard)
deny (mac access-list extended)
permit (ip access-list extended)
permit (ip access-list standard)
permit (mac access-list
extended)
qos (ip qos-flow-list)
qos (mac qos-flow-list)
monitor session
ip qos-flow-list
mac qos-flow-list
ip qos-flow-list resequence
mac qos-flow-list resequence
#
If the configuration file in which the
AX1230S series switch is restored on the Switch, the setting value is inherited. In this
case, if the
AX1250S and AX1240S series switch is used. For details, see 10.1.6 Functions that
use system function resources [AX1250S] [AX1240S].
For details about each command, see the Configuration Command Reference.
(2) Operation commands
The operation commands below have been changed in AX1250S and AX1240S series
switches. This includes changes in command names and input format. Displayed
information and behavior have not been changed.
Table 10-10 Operation commands
AX1250S/AX1240S command
show logging
clear logging
show critical-logging
clear critical-logging
set clock
show vlan mac-vlan
show access-filter
show qos-flow
show qos queueing
clear mac-authentication auth-state
For details about each command, see the Operation Command Reference.
116
Change from AX1230S
The input format has been changed.
The command has been changed.
The input mode has been changed.
system function
command has not been set, the default value on the
Change from AX1230S
show event-trace
show event-trace additional
clear event-trace
show log
clear log
The input format has been changed.
command has been set on an
system function
has been changed to
has been changed to
show
has been changed to
clear
has been changed to
show
logging.
has been abolished.
clear
logging.
critical-logging.
critical-logging.
Advertisement
Table of Contents
