Transferring Files Using A Memory Card - Alaxala AX2200S Series Configuration Manual

Figure 6-18 Operations on the console screen: Copying the startup configuration file to the
> enable
# copy startup-config ramdisk backup.cnf
#
On your PC, open the command prompt window.
Move to the directory in which the backup configuration file is to be stored, and log in to the
Switch by using the FTP protocol. Transfer the backup configuration file from the RAMDISK
on the Switch to the PC in ASCII mode.
Figure 6-19 Operations in the command prompt window: example of transferring a backup
C:¥TEMP>ftp 192.168.0.1
Connected to 192.168.0.1
220 AX1200 FTP server ready
User (192.168.0.1:(none)): operator
331 Password required
Password:
230 User logged in
ftp> asc
200 Type set to A, ASCII mode
ftp>
ftp> get backup.cnf
200 Port set okay
150 Opening ASCII mode data connection
226 Transfer complete
ftp:xxxxxx bytes sent in xx.x Seconds (xx.xx Kbytes/sec)
ftp> bye
221 Bye...see you later
C:¥TEMP>

6.5.2 Transferring files using a memory card

Use the copy
(1) Transferring a backup configuration file to the Switch
Insert the memory card containing the backup configuration file into the slot. Copy the
backup configuration file on the memory card to the RAMDISK on the Switch by using the
copy operation command. Copy the backup configuration file on the RAMDISK to the
startup configuration file by using the
the following figure.
Figure 6-20 Example of transferring a backup configuration file on a memory card to the
> enable
# copy mc backup.cnf ramdisk backup.cnf
# copy ramdisk backup.cnf startup-config
Do you wish to copy from RAMDISK to startup-config? (y/n): y
#
1. Copy the backup configuration file on the memory card to the RAMDISK.
2. Copy the backup configuration file on the RAMDISK to the startup configuration file.
(2) Transferring a backup configuration file to a memory card
Copy the backup configuration file to a memory card by using the
command.
Copy the startup configuration file to the RAMDISK by using the
Copy the backup configuration file on the RAMDISK to a memory card by using the
operation command. An example is shown in the following figure.
RAMDISK (copy command)
configuration file to the Switch
operation command to transfer files to a memory card.
Switch (copy command)
operation command. An example is shown in
copy
...1
...2
6 Configuration
copy operation
operation command.
copy
copy
73