Table of Contents
Advertisement
19 Spanning Tree Protocol
Points to note
If no value is set, 15 seconds is used for the status transition time. When changing
this parameter to a shorter time, make sure that the relationship between the BPDU
maximum enabled time (max-age) and sending interval (hello-time) satisfies the
following: 2 x (forward-time - 1) ≥ max-age ≥ 2 x (hello-time + 1).
Command examples
1.
(config)# spanning-tree single forward-time 10
Sets the status transition time to 10 seconds for Single Spanning Tree.
322
Advertisement
Table of Contents
