Table of Contents
Advertisement
3.1.2 Installed memory
The table below describes the amount of memory installed on the main board and available
memory card capacity. Memory cannot be expanded for the Switch.
Table 3-2 Amount of memory installed on the main board, and capacity of the internal flash
Item
Capacity of the memory
installed on the main
board
(including the RAMDISK)
Capacity of the internal
flash memory
(1) RAMDISK
The RAMDISK is used as a temporary storage area when a file is copied from the Switch to
a memory card, or from a memory card to the Switch.
For example, prior to the operations below, the target file is temporarily copied to the
RAMDISK.
Example 1: Copy the configuration file from the Switch to a memory card.
Example 2: Register the Web authentication window replacement file created on the
PC in the Switch.
After the file is copied to a memory card or registered in the Switch, the file on the
RAMDISK is no longer required. Use an operation command to delete the file on the
RAMDISK.
Restarting the Switch deletes the file on the RAMDISK.
memory and memory card
AX2200S series
128 MB
(12MB for the
RAMDISK)
16 MB
AX1250S Series
128 MB
(12MB for the
RAMDISK)
16 MB
3 Capacity Limit
AX1240S Series
128 MB
(12MB for the
RAMDISK)
16 MB
21
Advertisement
Table of Contents
