Deleting A Channel Group - Alaxala AX2200S Series Configuration Manual

Table of Contents

Advertisement

14 Link Aggregation
2.
(config)# interface port-channel 3
Switches channel group 3 to port channel interface configuration mode.
3.
(config-if)# switchport mode trunk
(config-if)# exit
Sets channel group 3 as a trunk port.
(3) Shutdown of a port channel interface
Points to note
When
registered in the channel group stops. Ports in the link-up status stop communication,
preserving the status.
Command examples
1.
(config)# interface range fastethernet 0/1-2
(config-if-range)# channel-group 3 mode on
(config-if-range)# exit
Adds ports 0/1 and 0/2 to channel group 3 in static mode.
2.
(config)# interface port-channel 3
(config-if)# shutdown
(config-if)# exit
Changes the mode to port channel interface mode, and sets
group 3 is shut down, so communication over ports 0/1 and 0/2 stops.

14.2.5 Deleting a channel group

Before you remove ports from a channel group or delete an entire channel group, you must
set
shutdown
you do not set
(1) Removing ports from a channel group
Points to note
You can remove a port from a channel group. Because the removed port can operate
independently of the channel group,
communication loop.
Be careful when using a removed port for another purpose because the related
commands that were set for the port by using the interface port-channel
command before the port was removed remain after the removal. (For details about
the related commands, see Table 14-4 Related commands for a port channel
interface.)
The
ports in the channel group are deleted. For details about deleting an entire channel
group, see (2) Deleting an entire channel group.
Command examples
1.
(config)# interface fastethernet 0/1
(config-if)# shutdown
224
shutdown
is set for a port channel interface, communication over all ports
in Ethernet interface configuration mode for the ports that will be removed. If
shutdown
, a communication loop might occur.
interface port-channel
shutdown
is set beforehand to prevent a
command settings are not deleted even if all of the
shutdown
. Channel

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax1250s seriesAx1240s series

Table of Contents