Command examples
1.
(config)# interface range gigabitethernet 0/25-26
(config-if-range)# shutdown
(config-if-range)# media-type rj45
Disables automatic media detection, and sets that a 10BASE-T, 100BASE-TX, or
1000BASE-T interface is used.
2.
(config-if-range)# no shutdown
(config-if-range)# exit
(3) Setting the media to SFP
Points to note
You must configure this setting if you choose to use SFP as the fixed media type.
Command examples
1.
(config)# interface range gigabitethernet 0/25-26
(config-if-range)# shutdown
(config-if-range)# media-type sfp
2.
(config-if-range)# no shutdown
(config-if-range)# exit
(4) Notes when setting the media type [AX1250S] [AX1240S]
1.
If the
media-type
commands return to the default values:
2.
If
media-type auto
the default value.
Disables automatic media detection, and sets the media type to SFP.
setting is changed, the settings of the following configuration
duplex
mdix auto
speed
is set, the configuration commands below cannot be set. Use
duplex
mdix auto
speed
13 Ethernet
185