Alaxala AX2200S Series Configuration Manual page 27



#

The Ethernet ports, console port, and the memory card slot are all on the front panel.

Device cooling methods appropriate for stable operation

(7) Fanless design (AX2230S-24T, AX1250S-24T2C, and AX1240S-24T2C)

(8) PoE support

PoE devices such as IP telephone and wireless LAN AP can be handled
(AX2230S-24P and AX1240S-24P2C).





(9) Compact design and low environmental impact

Compact chassis



RoHS compliant with reduced environmental impact.
(10) Power saving

Schedule functionality



LED operation control


Users can easily back up the configuration and save error information.
Simplified maintenance
In the manuals for this series of switches, MC refers to an SD memory card,
which appears in the description of operations and display items for an SD
memory card.
The air intake on the front and the air exhaust on the rear (AX2200S), or the
air intake on the side and the air exhaust on the rear (AX1240S) reduce the
effects of heat vented from other devices, and enable stable operation.
Problems due to dust sucked into devices decrease, and a quiet office
environment (without noise) is achieved.
Because the work of installing power cables is not required, the inconvenience
of increasing cables is removed, the costs for installing power cables are
reduced, and the network construction period is shortened.
Maximum power supply is 370.0 W.
IEEE 802.3af full power supply (Class 3: 15.4 W) allows 24 ports to be
powered at the same time.
IEEE 802.3at (Class 4: 30.0 W) is supported, allowing any mixture of class 1
to class 3.
Ports 0/1 to 0/4 support 60 W power supply. [AX2200S]
Compact 1U chassis
High port density, accommodating a maximum of 48 10BASE-T and
100BASE-TX ports
The switches can switch automatically to a sleep state and be woken up from
the sleep state, in accordance with the schedule settings for long holidays,
Saturdays, Sundays, public holidays, and evenings. [AX1250S] [AX1240S]
The LED operation and port power saving described below can be set up by
schedule settings.
LED operation is controlled in two steps: normal brightness and off.
[AX2200S]
LED operation is controlled in three steps: normal brightness, power saving
brightness (operation with lower brightness than normal), and off. [AX1250S]
[AX1240S]
1 Overview of the Switch
5