Alaxala AX2200S Series Configuration Manual page 57

(14) Secure Wake-on-LAN [OP-WOL]
The following table describes the capacity limits for the Secure Wake-on-LAN functionality.
Table 3-32 Capacity limits for the Secure Wake-on-LAN functionality
Item
Maximum number of users who can use the secure Wake-on-LAN function
concurrently
Maximum number of terminals that can be registered in the internal DB used to
register the terminal that sends the startup command
Maximum number of terminals that can be registered in the internal DB for user
authentication
Number of combinations of users and terminals
#1
Secure Wake-on-LAN functionality manages a single user from user authentication
to the completion of the terminal startup confirmation.
Therefore, if a long timeout value is used when confirming a startup with the internal
DB (used to register the terminals that send the startup command), the number of
managed entries for concurrent users might become saturated, causing the Secure
Wake-on-LAN functionality to become unavailable.
#2
The upper limit on the number of combinations of users and terminals is 300. So, for
example, if you allowed one user to access 300 terminals, then no access rights to
other terminals can be obtained by other users. The settings of
excluded from this limit.
(15) Uplink redundancy
The following figure shows the capacity limits for uplink redundancy.
Table 3-33 Capacity limits for uplink redundancy
Model
AX2230S-24T
AX2230S-24P
AX1250S-24T2C
AX1240S-24T2C
AX1240S-24P2C
AX1240S-48T2C
Table 3-34 Capacity limits for the MAC address update functionality
Model
All models
Number of uplink ports
14
13
25
Maximum number of outgoing MAC address entries
1024
3 Capacity Limit
Maximum number
#1
32
300
300
#2
300
any and
Number of attached interfaces
per uplink port
2
2
2
manual are
35