Alaxala AX2200S Series Configuration Manual page 267

Setting of Layer 2 authentication
One of the following authentication
methods is enabled:
1. IEEE802.1X

Authentication mode
Port-based
authentication (static) or
Port-based
authentication (dynamic)

Functionality to monitor
non-communication is
enabled.
2. Web Authentication

Authentication mode
Fixed VLAN mode or
Dynamic VLAN mode

Functionality to monitor
non-communication is
enabled.
3. MAC-based Authentication

Authentication mode
Fixed VLAN mode or
Dynamic VLAN mode

Functionality to monitor
non-communication is
enabled.
All other cases
Legend:
Y: Aging is performed.
N: Aging is not performed.
n/a: Not applicable.
Setting of the aging time for the
MAC address table
The aging time is set to 0 seconds.
The aging time is set from 10 to
300 seconds.
The aging time is set from 301 to
1000000 seconds.
Not set
The aging time is set to 0 seconds.
The aging time is set from 10 to
300 seconds.
The aging time is set from 301 to
1000000 seconds.
Not set
16 MAC Address Learning
Aging operation
Operat Aging time
ion
N n/a
Y 300 seconds
Y Specified time
Y 300 seconds
N n/a
Y Specified time
Y Specified time
Y 300 seconds
245