Table of Contents
Advertisement
25 Settings and Operation for IGMP Snooping and MLD Snooping
25.4 MLD snooping operation
25.4.1 List of operation commands
The following table describes the operation commands for MLD snooping.
Table 25-4 List of operation commands
Command name
show mld-snooping
clear mld-snooping
25.4.2 Checking MLD snooping
The following describes the MLD snooping contents to be checked when MLD snooping
functionality is used.
(1) Checking the setting status of MLD snooping
Execute the
MLD snooping are correct.
Figure 25-4 Displayed status for MLD snooping settings
> show mld-snooping
Date 2008/11/14 17:21:37 UTC
VLAN counts: 3
VLAN 3001:
IP Address:
MLD querying system:
Querier version: v1
Port (1): 0/12
Mrouter-port: 0/12
Group counts: 1
VLAN 3002:
IP Address:
MLD querying system:
Querier version: v1
Port (1): 0/12
Mrouter-port: 0/12
Group counts: 1
VLAN 3003:
IP Address:
MLD querying system:
Querier version: v1
Port (1): 0/12
Mrouter-port: 0/12
Group counts: 1
>
>
(2) During operation
Execute the following command to check the status of MLD snooping during operation.
Use the
learned MAC addresses, IPv6 multicast addresses forwarded within a VLAN, and a
454
Description
Displays MLD snooping information.
Clears all MLD snooping information.
show mld-snooping
operation command to check that the settings related to
Querier: enable
Querier: enable
Querier: enable
show mld-snooping group
operation command to check the statuses of
Advertisement
Table of Contents
