Table of Contents
Advertisement
10 Device Management
10.1 Settings related to status display and system operation
10.1.1 Lists of configuration commands and operation commands
The following tables describe the configuration commands and operation commands
needed to manage the Switch.
Table 10-1 List of configuration commands
Command name
system fan mode
system function
[AX1250S] [AX1240S]
system l2-table mode
system recovery
system
temperature-warning-level
system
temperature-warning-level
average
Table 10-2 Operation commands (software version and switch status check)
Command name
show version
show system
show environment
reload
show tech-support
108
Description
Sets the operating mode of the fan.
Configures the distribution of system function resources for a Switch.
Sets the search method for the Layer 2 hardware table.
no system recovery
When the
detected, the Switch does not restart and remains in the failure state.
Outputs a warning message when the intake temperature of the switch
exceeds the specified temperature.
Outputs an operation message when the average temperature of the
Switch for the specified period exceeds the specified temperature.
Description
Displays information about the Switch software and the board installed.
Shows the Switch's operating status.
Displays the status of the fan and of the power supply unit, the
temperature, and the total operating hours of the Switch.
Restarts the switch.
Collects hardware and software status information required for technical
support.
command is set and a failure is
Advertisement
Table of Contents
