Notes
Make sure that you set a valid combination for the transmission speed and duplex
mode. If you use auto-negotiation, you must set auto-negotiation for both the
transmission speed and the duplex mode. If you use fixed settings, you must use
fixed settings for both the transmission speed and the duplex mode. If the
combination is invalid, a connection with the remote device is established via
auto-negotiation.
13.5.2 Flow control settings
For details, see 13.2.7 Flow control settings.
13.5.3 Automatic MDIX functionality settings
For details about automatic MDIX settings, see 13.2.8 Automatic MDIX functionality
settings.
13.5.4 Using jumbo frames
For details about jumbo frame settings, see 13.2.9 Using jumbo frames.
13 Ethernet
173