Table of Contents
Advertisement
Figure 17-12 Setting example of forwarding tagged frames on a MAC port
Points to note
The example below shows how to configure a MAC port and to configure the same
port to handle tagged and untagged frames. For a MAC VLAN, set the MAC address
of the terminal.
VLAN 10: The port VLAN handles tagged frames.
VLAN 50: The MAC VLAN handles untagged frames.
Command examples
1.
(config)# vlan 10
(config-vlan)# exit
Creates VLAN 10 as a port VLAN.
2.
(config)# vlan 50 mac-based
(config-vlan)# mac-address 0012.e200.0004
(config-vlan)# exit
Creates VLAN 50 as a MAC VLAN, and sets the MAC address of the terminal
belonging to VLAN 50 (0012.e200.0004).
3.
(config)# interface fastethernet 0/1
Switches to the Ethernet interface configuration mode for port 0/1.
4.
(config-if)# switchport mode mac-vlan
Specifies the port 0/1 for the MAC port.
5.
(config-if)# switchport mac dot1q vlan 10
17 VLANs
279
Advertisement
Table of Contents
