Table of Contents
Advertisement
21 Settings and Operation for the Ring Protocol
Command examples
1.
(config)# axrp 1
Switches to axrp configuration mode for ring ID 1.
2.
(config-axrp)# multi-fault-detection vlan 20
(config-axrp)# exit
Sets VLAN 20 as the multi-fault monitoring VLAN.
Notes
Set the multi-fault monitoring VLAN on all nodes in shared link monitoring rings to
which the multi-fault monitoring functionality is applied.
(2) Setting monitoring modes for the multi-fault monitoring functionality
Points to note
Sets the monitoring mode for the Switch to
transport-only
Command examples
1.
(config)# axrp 1
Switches to axrp configuration mode for ring ID 1.
2.
(config-axrp)# multi-fault-detection mode transport-only
(config-axrp)# exit
Sets the monitoring mode for multi-fault monitoring to
394
only.)
transport-only
. (The Switch supports
transport-only
.
Advertisement
Table of Contents
