specify the settings below for the VLAN interface configuration mode of the
corresponding VLAN. The following shows an example where the multicast router is
connected to the Ethernet interface on port 0/1 within the target VLAN.
Command examples
1.
(config)# interface vlan 2
(config-if)# ip igmp snooping mrouter interface fastethernet 0/1
(config-if)# exit
Specifies the multicast router port for the corresponding interface.
Notes
If you set a port number belonging to a port channel interface for a multicast router
port, no operation is performed.
25 Settings and Operation for IGMP Snooping and MLD Snooping
449