Table of Contents
Advertisement
9.3 Operation
9.3.1 List of operation commands
The following table describes the operation commands related to time settings and NTP.
Table 9-4 List of operation commands
Command name
set clock
set clock ntp
show clock
show ntp-client
9.3.2 Checking the time
Using the
Switch. An example is shown below:
Figure 9-5 Checking the time
> show clock
Tue Feb 22 15:30:24 JST 2011
>
9.3.3 Displaying the NTP client information
When the Switch obtains time information from the NTP server, you can use the
ntp-client
shown below:
Figure 9-6 Displaying the NTP client information
> show ntp-client
Date 2009/02/23 11:38:05 UTC
Last NTP Status
NTP-Server : 192.168.7.1, Source-Address : ---
Mode : Multicast, Lapsed time : 14(s), Offset : 1(s)
Activate NTP Client
NTP-Server : ---, Source-Address : ---
Mode : Multicast
NTP Execute History(Max 10 entry)
NTP-Server
192.168.7.1
192.168.7.1
192.168.7.1
192.168.7.2
192.168.7.1
192.168.7.2
192.168.7.1
192.168.7.1
192.168.7.1
192.168.7.1
>
Description
Displays and sets the date and time.
Manually obtains time information from the NTP server.
Displays the currently set date and time.
Displays the NTP client information.
show clock
operation command, you can check the time information set in the
operation command to display the NTP client information. An example is
Source-Address
---
---
---
---
---
---
---
---
---
---
Mode
Set-NTP-Time
Multicast 2009/02/23 11:37:51
Multicast 2009/02/23 11:36:51
Multicast 2009/02/23 11:35:51
Command
2009/02/23 11:35:24
Multicast 2009/02/23 11:34:51
Command
2009/02/23 11:34:15
Multicast 2009/02/23 11:33:51
Multicast 2009/02/23 11:32:51
Multicast 2009/02/23 11:31:51
Multicast 2009/02/23 11:30:51
9 Time Settings and NTP
show
Status
1
1
1
Timeout
1
Timeout
1
1
1
0
105
Advertisement
Table of Contents
